| Home | Products | Installation Video | About Us | Contact Us |
In order for the mount to be truly versatile I needed it to support multiple mounting options on the bow. I didn't want to be forced to mount it just over my stabilizer or utilizing one of the manufacturer provided mounting holes as in Figure 1 & 2. Although this position may be just the way you want it... the design of the mount allows for it to be mounted just about anywhere on your bow. This unique capability also allows for the mount to be used on virtually any bow. I have yet to find a bow that it will not mount on.
Figure 3 and 4 shows how the mount can easily be attached utilizing any of the bows cut-outs. Figure 5 and 6 show how the mount can even be attached to the bows site. Even when the mount is attached to either of these alternative locations, the camera mount swing arm can still be easily rotated forward to position the camera out of harms way, then slid quietly back into position when the time is right.
Note: Optional hardware (screws, washers & wing nuts) are not included and can be purchased on the Products page.
 |
 |
 |
 |
 |
 |
Click thumbnail to see larger picture
Because of the unique and versatile design of the InsaneArchery Camera Mount - it can easily be attached to most crossbows by utilizing the manufacturer's cut-outs or accessory mounting holes. If you would like to use this type of configuration, you'll need to order the optional Mounting Bracket. Or you can simply purchase a piece of 90 degree angle iron at most hardware stores.
